Description
Whitening Plus is one of GE's most popular and long-established car care products: an alkaline deep-cleaning treatment that removes stubborn stains and oxidation from vehicle paintwork and restores its original colour. It addresses the dull, built-up grime that ordinary washing leaves behind, such as the greyed oxidation layer on neglected paint and the dark deposits trapped in the fine scratches around door handles. A single application, sprayed on and wiped over, lifts these away immediately.
Whitening Plus performs best on white vehicles and is equally suitable for other light and bright finishes, including silver. It contains a built-in corrosion inhibitor and is supplied ready to use, with no dilution required.
As a dedicated deep cleaner for stubborn dirt and oxidation, Whitening Plus is best used alongside the correct product for other tasks: Watermark Remover, an acid-based formula, for water marks, and Iron Remover for rust spots and iron fallout.
It is suitable for car owners, detailing professionals, car wash operators and workshops, particularly those maintaining white and light-coloured vehicles.
Key Features
- Alkaline deep-cleaning formula that removes stubborn stains and oxidation
- Restores and brightens the paintwork's original colour
- Performs best on white, light and bright finishes, including silver
- Built-in corrosion inhibitor
- Ready to use, with no dilution required
Benefits
- Removes built-up grime and oxidation that ordinary washing cannot
- Clears the dark deposits trapped in scratches around door handles and trim
- Restores dull, weathered paint to a brighter, truer colour
- Fast and straightforward, applied section by section
- Available in 1L, 4L and 20L
How to Use
- Wash and dry the vehicle body, and work in shade on a cool surface.
- Spray Whitening Plus directly onto the paintwork.
- Wipe gently with a microfibre towel; heavy scrubbing is not required.
- Rinse off immediately with clean water, and do not allow the product to dry on the surface.
- For a full vehicle, work section by section, rinsing each section before proceeding.
Safety
Whitening Plus is an alkaline cleaner. Wear gloves and avoid contact with eyes during use. Apply only to a cool surface in a shaded area, as heat and direct sunlight increase its activity and cause it to dry too quickly; dried product is difficult to remove without agitation. It is compatible with chrome, rubber, matte paint and trim. Do not apply to aged or damaged paintwork, including failing clear coat or thin touch-up repairs, as the alkaline formula may penetrate and lift compromised paint. Rinse thoroughly with clean water after use, and store out of reach of children.
Available Sizes
Frequently Asked Questions for Whitening Plus (WT-P)
Wash and dry the vehicle first, and work in shade on a cool surface. Spray Whitening Plus directly onto the paintwork, wipe gently with a microfibre towel (heavy scrubbing is not required), then rinse off immediately with clean water. Do not allow the product to dry on the surface. For a full vehicle, work section by section, rinsing each section before proceeding. Do not use on hot panels or in direct sunlight, as heat increases the product's activity and causes it to dry too quickly.
Whitening Plus is an alkaline deep cleaner for stubborn stains and oxidation on paintwork, namely the dull, built-up grime that ordinary washing leaves behind, including the dark deposits trapped in the fine scratches around door handles. It performs best on white and light-coloured vehicles. For other contamination, use the corresponding product: Watermark Remover, an acid-based formula, for water marks, and Iron Remover for rust spots and iron fallout. Selecting the correct product for each task delivers the best result.
Yes. It is suitable for paintwork in good condition and is compatible with chrome, rubber, matte paint and trim. It contains a corrosion inhibitor, and while it is not harsh on skin, gloves are recommended. The exception is aged or damaged paintwork, such as failing clear coat or thin touch-up repairs, where a strong alkaline cleaner may penetrate and lift the paint. When in doubt, test a small, concealed area first, and always rinse before the product dries.
Inquiry - Whitening Plus (WT-P)
