Description
Watermark Remover is a mild acid-based formula that chemically dissolves stubborn hard-water marks from glass, paint and chrome. It breaks down the mineral deposits left by water droplets before they can etch into the surface, removing marks that ordinary cleaners cannot.
Because it works chemically and acts quickly, it must be rinsed off promptly and never left to dry; if the product dries on the surface, the acid can etch the glass. It is a strong, professional-grade product. For a gentler, home-use alternative, GE Glass Compound removes water marks physically, using a cerium oxide polish rather than acid.
Watermark Remover is safe on glass, paint and chrome, and it can also be used on mirrors and headlight covers. Beyond the vehicle, it removes hard-water and limescale marks from household glass, such as windows and bathroom or shower glass doors and partitions. It can also be used on tinted windows and hydrophobic glass coatings; however, as films and coatings vary widely in composition, test a small, concealed corner first and proceed only once no adverse effect is confirmed. It is suitable for detailing professionals, automotive workshops, and experienced users treating heavily water-stained surfaces.
Key Features
- Mild acid-based formula that chemically dissolves hard-water marks
- Works on glass, paint, chrome, mirrors and household glass
- Removes mineral deposits
- Fast-acting and professional strength
- Usable on tint and glass coatings after a small-area test
Benefits
- Removes water marks that ordinary glass cleaners cannot
- Restores clarity to heavily water-stained glass
- Works chemically, with no polishing or machine required
- Tackles hard-water and limescale marks on household and bathroom glass
- Available in 1L, 4L and 20L
How to Use
- Wash and dry the glass, paint or chrome surface completely, and work in shade on a cool surface.
- Apply the product directly onto the affected area.
- Gently wipe back and forth using the soft side of a sponge, allowing a short dwell time.
- Rinse off immediately with plenty of water; do not let the product sit or dry on the surface.
- Dry the surface and check the result; repeat if water marks remain.
On tinted windows or coated glass, test a small, concealed area first.
Safety & Compatibility
Watermark Remover is a mild acid-based product. Wear gloves and eye protection, and use it in a well-ventilated area. Apply only to a cool surface, never to hot glass or in direct sunlight. Do not allow it to dry on the surface, as the acid can etch glass; rinse thoroughly and promptly after use. It is safe on glass, paint and chrome; on tinted windows and glass coatings, test a small, concealed area first, as films and coatings vary in composition. Store out of reach of children.
Available Sizes
Frequently Asked Questions for Watermark Remover (WM-X)
First, wash and dry the glass or mirror surface completely, and work in a shaded area on cool glass. Apply the product directly onto the glass, then gently wipe back and forth using the soft side of a sponge. Rinse off immediately with plenty of water; do not let the product sit or dry on the glass, as the acid can etch the surface. Dry and check the result, and repeat if water marks remain. Wear gloves and eye protection. On tinted windows or coated glass, test a small, concealed area first, as films and coatings vary in composition.
It can be used on glass, paint and chrome. On all three, it dissolves hard-water and mineral marks chemically. Apply it to a cool surface, keep the treatment brief, and rinse thoroughly before the product dries. As with any acid-based product, test a small, concealed area first when treating a surface for the first time.
Yes. Besides automotive glass, paint and chrome, it removes hard-water and limescale marks from household glass, including windows and bathroom or shower glass doors and partitions. Apply it to a cool surface, keep the treatment brief, and rinse thoroughly with water before it dries. As always, test a small, concealed area first on tinted or coated glass.
They remove water marks in two different ways. Watermark Remover is a mild acid that dissolves the mineral deposit chemically, which is fast but must be rinsed off promptly and never left to dry. Glass Compound removes water marks physically, using a cerium oxide polish worked over the surface; it will not etch the glass and is more forgiving, requiring only a thorough water rinse afterwards. Choose Glass Compound for a forgiving polish and Watermark Remover for a quick chemical treatment.
Inquiry - Watermark Remover (WM-X)
