Glass Coating (GS-C)

Description

Glass Coating is a SiO2-based hydrophobic coating for automotive glass. It makes rainwater bead up and roll off the surface, and at speed the airflow carries the water away, which keeps the windscreen clear and improves visibility and safety in wet weather. It can be used on all exterior glass and mirrors.

It is applied in a single coat. Spread it evenly over clean glass with a sponge, and if too much is applied, simply wipe it even with a clean towel. Leave it to cure for around 15 to 30 minutes, depending on the ambient conditions and temperature. Once cured, the glass can get wet straight away, with no waiting time.

The water-repellent effect lasts around two to three months, and often longer, depending on how the vehicle is used and washed. It is safe on the windscreen and does not cause wiper juddering.

Beyond vehicles, Glass Coating can be used on household and building glass, such as windows, shower screens and mirrors. It is designed for the outer glass surface; window tint is normally fitted to the inside of vehicle glass, so it does not affect exterior application. On filmed or coated building glass, test a small, concealed area first, as films vary, and proceed only once no adverse effect is confirmed.

For the best result, apply to clean glass, and remove any existing water marks beforehand so that the coating bonds to a clean surface. It is suitable for car owners, detailing shops and workshops, as well as homes and buildings.

Key Features

• SiO2-based hydrophobic coating for automotive glass
• Repels rain and beads water away for clearer wet-weather visibility
• Long-lasting effect of around two to three months, and often longer
• Single-coat application that cures in about 15 to 30 minutes
• Safe on the windscreen without causing wiper juddering
• Also suitable for household and building glass and mirrors

Benefits

• Improves driving visibility and safety in the rain
• Water is carried off the windscreen at speed, reducing reliance on the wipers
• Long-lasting protection from a single, quick application
• Keeps glass cleaner and easier to maintain
• Available in 50ml, 100ml, 500ml, 1L and 4L

How to Use

1. Clean and dry the glass thoroughly, and remove any existing water marks first for the best bond. Work on cool glass out of direct sunlight.
2. Apply the coating onto a sponge and spread it evenly over the glass in a single, thin layer.
3. If too much is applied, wipe it even with a clean towel.
4. Leave it to cure for around 15 to 30 minutes, depending on the ambient conditions and temperature.
5. Once cured, the glass can get wet straight away.

Safety & Compatibility 

Glass Coating is designed for the outer surface of automotive glass and mirrors, and can also be used on household and building glass. It is safe on the windscreen and does not cause wiper juddering. Window tint is normally fitted inside the vehicle, so exterior application is unaffected; on filmed or coated building glass, test a small, concealed area first, as films vary. Apply to cool, clean glass out of direct sunlight, and if the product contacts paintwork, wipe it off before it dries. Avoid contact with eyes, and store out of reach of children. Use in a well-ventilated area. The product is flammable while wet, so keep it away from open flames and sparks until it has cured.

Available Sizes

• 50ml, 100ml, 500ml, 1L, 4L